EAA Builders Log Website
EMail address:
Password:
- Lost my password
close
EAA Builders Log
(An EAA website).
Help
Contact Us
About
Sign Up
Login
Project:
Sportsman
-
Listing of Entries
(Please mouse-over any icon to get a description of that function).
Categories
Show All Entries
- (661)
Rudder (III)
- (1)
Horiz S (IV)
- (11)
Elevator (V)
- (32)
Wing LH (VI)
- (107)
-
Step 52- Fabricate...
-
Step #65 - Rivet LWR...
-
Step #65 - Rivet LWR...
-
Step #65 - Rivet LWR...
-
Step #65 - Rivet LWR...
-
Step #65 - Rivet LWR...
-
Step #65 - Rivet LWR...
-
Step #65 - Rivet LWR...
-
Step #65 - Rivet LWR...
-
Step #65 - Rivet LWR...
-
Step #65 - Rivet LWR...
-
Step #64 - Drill...
-
Step #63 - Fab Flap...
-
Step #62 - Rivet...
-
Step #62 - Rivet...
-
Step #62 - Rivet...
-
Step #62 - Rivet...
-
Step #62 Rivet...
-
Install Pitot Tube...
-
Step # 62 - Rivet...
-
Step #60 - Rivet...
-
Step #61- Cut flap...
-
Step #60 - Rivet...
-
Step #59 - Rivet...
-
Step #59 - Rivet...
-
Step #58 - Mount...
-
Step #57 - Mount...
-
Step #54 - Mount...
-
Step #57 - Mount...
-
Step #54 - Mount...
-
Step #58 - Fabricate...
-
Step #57 - Mount...
-
Step #53 - Assemble...
-
Step #52 - Mount...
-
Step #51 - Mount...
-
Step #50 - Mount...
-
Step #49 - Position...
-
Step #48 - Position...
-
Step #43 - corrosion...
-
Step #42....
-
Strep #42 -...
-
Step#42 -...
-
Step #41 - Dimple Skins
-
Step #41 - Dimple Skins
-
Step #41- Dimple Skins
-
Step #41 - Deburr skins
-
Step #41 - Deburr skins
-
Step #41 - Deburr skins
-
Step #41 - Deburr skins
-
Step #41 - Deburr skins
-
Step #41 - Dimple...
-
Step #41 - Dimple...
-
Step #41 - Dimple Skins
-
Step #40 - Finish...
-
Step# 39 - Position...
-
Step #38 - Position...
-
Step #36 - Position...
-
Step #37 - Drill...
-
Step #34 & 35 -...
-
Step #25 - Position...
-
Step #24 - Position...
-
Step #23 - Finish...
-
Step #22 - Trim...
-
Step #20 - Position...
-
Step #20 - Position...
-
Step #19 - Finish...
-
Step #19 - Finish...
-
Step #18 - Install...
-
Step # 17 - Drill...
-
Step #17 - Center...
-
Step #16 - Index...
-
Step #17 - Inboard...
-
Checking Main Rib...
-
Step #15 - Mount...
-
Step #15 - Mount...
-
Step #13 - Mark ribs
-
Step #12 - Mount...
-
Step #12 - Mount...
-
Step# 12 Mount Ribs...
-
Step #11 - Root Rib...
-
Step #11 - Reinforce...
-
Step #11 - Reinforce...
-
Step #7 - Mark rivet...
-
Step #55 & 56 -...
-
Step #55 - Assemble...
-
Step #51 & 52...
-
Step #48 Assemble...
-
Step #48 Assemble...
-
Step 47 - Rivet...
-
Step #46 - Rivet...
-
Step #45
-
Step #45 Rivet and...
-
Step #47 - Assemble...
-
Painting subassembly...
-
Deburr all sub...
-
Step 51 - Fab...
-
Step #56 - Assemble...
-
Step #55 - Assemble...
-
Step #46 - Assemble...
-
Step #44 - Fit and...
-
Step 14 - Assemble...
-
Step #10 - square...
-
Step #4 -6 Not...
-
Step #2, #3, 8, 9...
-
Step 1 - Fabricate...
-
Aileron Support Bracket
-
Flap Bell Crank Assy
Wing RH (VI)
- (82)
Aileron(VII)
- (38)
Flaps (VII)
- (32)
Fuselage (VIII)
- (67)
Systems (IX)
- (113)
Avionics
- (13)
Engine
- (1)
Inspection
- (2)
Interior Finish
Lighting
- (1)
Paint / Decals
- (5)
Propeller
- (1)
Kit INVTRY
- (5)
Research
- (6)
Tools
- (1)
Workshop
- (13)
Wings
Final (X)
- (126)
FWF (X)
- (2)
Phase 1
- (2)
Builder Name:
Kyle Stone
-
Project:
Glasair - Sportsman 2+2
-
VIEW REPORTS
Total Hours:
1859.9
Start/Last Date:
Jul 03, 2019 - Jun 30, 2022
Engine:
Lycoming IO-390-EXP
Panel:
Garmin G3X w/ GNX375 IFR nav, GNC 255 NAV/COM
Friendly URL:
https://eaabuilderslog.org?s=Sportsman
Home or Last Project Picture
Feb 22, 2020
Step #61- Cut flap track clearance slots in LWR skins
- (1.5 hours)
Category: Wing LH (VI)
I still do not have the hang of using the sheet metal shears. The first slot almost ended in disaster when I accidentally snipped a little too far. Was able to buff it out and widen the slot a little. I did practice and master the step drill for corners. This worked out much better than on past hole cutting attempts. The outboard slot I used my portable reciprocating saw with a fine metal bit. Worked perfectly and will use it in the future.
UNADJUSTEDNONRAW_thumb_142bf.jpg
UNADJUSTEDNONRAW_thumb_142c3.jpg
UNADJUSTEDNONRAW_thumb_142c8.jpg
UNADJUSTEDNONRAW_thumb_142d2.jpg
UNADJUSTEDNONRAW_mini_142c9.jpg
UNADJUSTEDNONRAW_thumb_142be.jpg
UNADJUSTEDNONRAW_thumb_142c2.jpg
UNADJUSTEDNONRAW_thumb_142ca.jpg
UNADJUSTEDNONRAW_thumb_142cb.jpg
UNADJUSTEDNONRAW_thumb_142cc.jpg
UNADJUSTEDNONRAW_thumb_142d0.jpg
NOTE: This information is strictly used for the EAA Builders Log project within the
EAA organization
.
-
Policy
-
© Copyright 2024 Brevard Web Pro, Inc.